TOA HydroQuick Primer

• Fast dry
• Low odor ,Low VOCs , safe for user
• Wall Shield technology enhances adhesion better than water base primer 2x
• Super hiding power
• Instant apply, Super PH balance 
• Superior breathable film, rising damp content 40%
• Excellent alkali resistance & Anti-efflorescense
• Anti-Fungus & Algae
• Low VOCs , Safe for user
• Support for Green Building standards

  ราคาขึ้นอยู่กับเฉดสีแต่ละเฉด โปรดเลือกเฉดที่ต้องการ ได้ที่ กด " ดูเพิ่ม " จะพบแคตตาล๊อก ติดต่อสอบถามราคา  083-2393626  ,  083-2396466  หรือ  LINE : @TOPAINTS   

• TOA HYDRO QUICK PRIMER is base on super speacial acrylic emulsion from Europe with Wall shield super nano size technology. Designed for used muti-purpose primer. This product is super bonding agent that provides excellent adhesion between the substrate and paint film. The properties of this product are protect all problem of cement. Excellent alkali resistance and Efflorescence.

• New surface

• • Allow the surfaces dry at least 2 days in case of speedy work.

• • The surfaces must be clean and free of dirt, grease, oil, wax, salt and other contaminants.

• • TOA Acrylic Sealent or TOA Acrylic Filler is used to repair all cracks and rough surfaces.

• Old surface

• • The surfaces must be clean and free of dirt,wax,salt,old paint and other contaminants.

• • Chalky surfaces or loose material must be removed by stiff brush.
  • TOA113 Microkill is used to get rid of algae and fungi that left on the surfaces.

• • The surfaces must be clean with suitable cleansing solution and water then rinse thoroughly with fresh water and allow to fully dry.

• • TOA Acrylic Sealent or TOA Acrylic Filler is used to repair all cracks and rough surfaces.

• Primer

• • Apply by brush with TOA HYDRO QUICK PRIMER 1 coat.

• Topcoat

• • Can be topcoat with Acrylic Emulsion Paint and Alkyd Base Enamel Paint.

• Recommendation

• • The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.