TOA DeckingStain Toa DeckingStain Matt is formulated from alkyd resin, special additives and translucent pigments. It highly protects wood from UV light. Paint film is highly flexible, resistant to scratch, prevents water penetration, anti-bacteria and anti-termite. It is easy to apply, thick film, matt finishing, smooth film and highly adhesive with wood.
Type of Finishing
Matt
Can Size
1 GL.
2 Times Better Trample Resistance
2 Times more durable paint film with Titanium Nano Technology from Germany.
Translucent paint film & Highlighting wood texture/grain by Transparent Pigment.
5 Times faster dry & Reducing dust stick on paint film.
With UV Absorber, preventing wood from UV light.
Flexible film No crack, blister and peel.
Easy to wash.
Excellent anti-bacteria, anti-moth and anti-termite.
Free from dangerous heavy metals Lead & Mercury.
Transparent Matt Wood Coating for Exterior
Suitable for only exterior wood coating application such as wood exposed by sunlight, wood near pool, wood near fence and wood furniture. Note : Paint film is completely dry when exposed by sunlight.
Toa Decking Stain is based on modified alkyd resin, special additives and transparent pigments. The properties of this product are excellent UV resistance, high flexibility, good scratch resistance, good waterproof, anti-fungi,good leveling, high film build, smooth feeling matt and good penetration into the wood that provides excellent adhesion. Suitable for all exterior woodworks such as wooden floor, wooden fence, wooden furniture and etc.
APPLICATION SYSTEM Surface Preparation
Old surface
For coated wood or wood with old or peeling paint film or old wood with no coating.
Sand with abrasive paper to the wood surface.For coated wood which coating film still in good condition. Sand over the painted film with TOA abrasive paper no. 240-320 then clean the surface to remove grease, dust, oil or dirt
New surface
1. Use TOA abrasive paper no. 240 – 320 to sand the wood surface until smooth.
2. Fill all wood crack and hole by filler.
3. Sand again until the smooth surface is obtained and clean the surface until no dust remain.
Coating system
Primer
Apply by brush with TOA Wood Preservative 1 coat. (Recoatable time is at least 30 minutes)
Topcoat
1. Mixing ratios between TOA Decking Stain and TOA Thinner No.21 are 5:1 for first coat and 10:1 for second and third coat, respectively.
2. Apply by brush with TOA Decking Stain at least 3 coats. (Recoatable time is at least 6 hours)
3. Before topcoat any layer, TOA abrasive paper no. 320 – 400 are recommended to sand the surface which provide good intercoat adhesion and smooth the surface.
Recommendation
The temperature of the substrate should be minimum 10°C and at least 3°C above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.
HANDLING AND STORAGE Storage condition
The product must be stored in accordance with national regulations.
Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.