SuperShield TimberShield

• With the innovation of 100% ultra premium water-based pure acrylic, it is specially developed for wood coating with high adhesion and excellent durability to protect original wood surface.
• Toa SuperShield TimberShield is suitable for exterior wood application as it is formulated from 100% pure acrylic emulsion co-polymer with durable pigments and special additives. Paint film is flexible , self-cleaning, durable to any weather condition, prevents water penetration and anti-mold.
  

Type of Finishing	Sheen
Can Size	1 GL.
Support

• Thailand's 1st innovation of water-based acrylic for opaque wood application.
• Low VOCs & Low odour formula with Green Technology.
• Durable up to 15 years, 3 times higher durable than premium solvent-based woodstain.
• Smooth paint film & Highlighting wood texture to become beautiful and easy to wash.
• Flexible film No crack, blister and peel.
• Excellently resistant to water & Anti-mold and Anti-algae.
• Easy to apply Roll, brush or spray.
• Free from dangerous heavy metals Lead & Mercury.

• 1. Surface preparation
  • For new surface : To scratch surface with sandpaper and clean dust and grease.
  • For old surface : To scratch paint surface to increase adhesion. If paint surface is in bad condition, it needs to scratch deep into wood surface. (In case of having mold or algae, to clean with water and use TOA 113 Micro Kill and leave it dry before painting)
• 2. Primer application
  • Without gum : To apply 1 layer of TOA Undercoat White G1600.
  • With gum : To apply 1 layer of TOA G1601 once. Then to apply 1 layer of TOA Undercoat White G1600.
• 3. Top coat application
  • To apply 2 layers SuperShield TimberShield.

• Toa 301 Acrylic Sealent or Toa Acrylic Filler is used to repair all cracks and holes.
• Use Toa Abrasive Paper to sand the wood surface until smooth.
• The surfaces must be clean and free of dirt, grease, oil, wax, salt and other contaminants.

• The surfaces must be clean and free of dirt,wax,salt,old paint and other contaminants.
• Use TOA Abrasive Paper to sand the wood surface until smooth
• TOA 301 Acrylic Sealent or TOA Acrylic Filler is used to repair all cracks and rough surfaces.
• Sand again until the smooth surface is obtained and then clean the surface until no dust remain.

• Apply by brush or roller with TOA Aluminium Wood Primer#0AWP 1 coat (Recoatable at least 4 hr)
• Apply by brush or roller with TOA Univarsal Undercoat White#G1600 1 coat(Recoatable at least 1 hr)

• Apply by brush or roller with SuperShield Timbershield at least 2 coats.

• The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.

• The product must be stored in accordance with national regulations.  
• Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.

  *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***