Toa WoodStain Waterborne Semi-Gloss is formulated from acrylic emulsion polymer, consisting of Nano Cerium UV Absorber and translucent pigments. It excellently protects wood from UV light. Paint film is highly flexible. With Nano Silica, it enhances scratch resistance and prevents water penetration. It contains anti-mold and anti-termite agent and is easy to apply with thick film, gloss finishing and highly adhesive with wood.
Type of Finishing
Semi-Gloss
Can Size
1 GL.
Safe, Odourless and Super Adhesion
Low VOCs. & Low odour with Green Technology.
Translucent paint film & Highlighting wood texture appearance by Transparent Pigment
Easy to use, fast-drying and able to move in within 1 day.
With Nano Cerium UV Absorber, protecting wood from UV light.
Flexible film No crack, blister and peel.
Easy to wash.
Excellent anti-bacteria, anti-moth and anti-termite.
Safe with European Standard EN71 Free from 8 dangerous heavy metals.
For Real Wood & Fiber Composite Board
Suitable for exterior and interior wood coating application such as
wall, gable, ceiling, handrail, fence and furniture.
Toa Woodstain Waterborne Semi-Gloss is based on acrylic emulsion polymer, special additives and transparent pigments. The properties of this product are excellent UV resistance, high flexibility, good scratch resistance, good waterproof, anti-fungi, anti-insects, good leveling, high film build, and good penetration into the wood that provides excellent adhesion. Suitable for all exterior woodworks such as wooden floor, wooden fence, wooden furniture and etc.
APPLICATION SYSTEM Surface Preparation
Old surface
For coated wood or wood with old or peeling paint film or old wood with no coating.
Sand with abrasive paper to the wood surface.For coated wood which coating film still in good condition. Sand over the painted film with TOA abrasive paper no. 240-320
then clean the surface to remove grease, dust, oil or dirt.
New surface
1. Use Toa abrasive paper no. 240 – 320 to sand the wood surface until smooth.
2. Fill all wood crack and hole by filler.
3. Sand again until the smooth surface is obtained.
4. Clean the surface until no dust remain.
Coating system
Primer
Apply by brush with Toa Wood Preservative 1 coat to prevent fungus and controll wood-destroying insects. (Recoatable time is at least 30 minutes)
Topcoat
1. Apply by brush with Toa Woodstain Waterborne Semi-Gloss at least 3 coats.
(Recoatable time is at least 1 hours)
2. Before topcoat any layer, TOA abrasive paper no. 320 – 400 are recommended to sand the surface which provide good intercoat adhesion and smooth the surface.
Recommendation
The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.
HANDLING AND STORAGE
Storage condition
The product must be stored in accordance with national regulations.
Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.