TOA Matt Lacquer Waterborne

• Low VOCs & Low odour with Green Technology.
  
• Easy to use, fast-drying and able to move in within 1 day.
  
• Self Cross-link Technology Enhancing paint film strength & adhesion.
  
• Prevent water penetration.
  
• Transparent paint film & Highlighting wood texture/grain.
  
• Safe with European Standard EN71 Free from 8 dangerous heavy metals.

  ราคาขึ้นอยู่กับเฉดสีแต่ละเฉด โปรดเลือกเฉดที่ต้องการ ได้ที่ กด " ดูเพิ่ม " จะพบแคตตาล๊อก ติดต่อสอบถามราคา  083-2393626  ,  083-2396466  หรือ  LINE : @topaints   

• Old surface
  • For coated wood or wood with old or peeling paint film or old wood with no coating.
  • Sand with abrasive paper to the wood surface.For coated wood which coating film still in good condition.
  • Sand over the painted film with TOA abrasive paper no. 240-320
  • then clean the surface to remove grease, dust, oil or dirt.
• New surface
  • 1. Use TOA abrasive paper no. 240 – 320 to sand the wood surface until smooth.
  • 2. Fill all wood crack and hole by filler.
  • 3. Sand again until the smooth surface is obtained.
  • 4. Clean the surface until no dust remain.

• Topcoat
  • 1. Apply by brush with TOA Lacquer Waterborne Matt at least 3 coats.(Recoatable time is at least 1 hours)
  • 2. Before topcoat any layer, TOA abrasive paper no. 320 – 400 are recommended to sand the surface which provide good intercoat adhesion and smooth the surface.

• The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.

• Storage condition
  • The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.
• Shelf life : 3 years.

  *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***