TOA Varnish Matt T-9000 Toa Matt Vanish T-9000 is suitable for interior wood application. It enhances beauty of natural wood texture/grain and is easy to use and fast-drying. Paint film is smooth and prevents water penetration. Suitable for wood structures such as house and boat, as well as furniture. Not recommended for wood flooring and wood stair.
Toa Varnish Matt Interior T-9000 is based on Alkyd Resin and special ingredients that provides natural beauty of wood grain. Properties of the products are fast dry, smooth feeling matt and excellent waterproof. Toa Varnish Matt Interior T-9000 is suitable for interior wooden structure such as wooden wall, wooden door, wooden furniture and etc.
APPLICATION SYSTEM Surface Preparation
New surface
For coated wood or wood with old or peeling paint film or old wood with no coating. Sand with abrasive paper to the wood surface.For coated wood which coating film still in good condition. Sand over the painted film with TOA abrasive paper no.240-320 then clean the surface to remove grease, dust, oil or dirt.
Old surface
1. Use TOA abrasive paper no. 240 – 320 to sand the wood surface until smooth.
2. Fill all wood crack and hole by filler.
3. Sand again until the smooth surface is obtained and clean the surface until no dust remain.
Coating system
Topcoat
1. Apply by brush with TOA Varnish Gloss Interior T-8000 at least 2 coats.
2. Apply by brush with TOA Varnish Matt Interior T-9000 at least 2 coat.
Recommendation
The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.
HANDLING AND STORAGE
Storage condition
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.