SUPERTECH Lacquer Primer Surfacer

• Fast-drying & Easy to scrub.
• High concentration & High coverage.
• Smooth & Thick pain film.
• Free from dangerous heavy metals Lead & Mercury.

  ราคาขึ้นอยู่กับเฉดสีแต่ละเฉด โปรดเลือกเฉดที่ต้องการ ได้ที่ กด " ดูเพิ่ม " จะพบแคตตาล๊อก ติดต่อสอบถามราคา  083-2393626  ,  083-2396466  หรือ  LINE : @topaints   

• Old surface
  • 1. Chalky surfaces or loose material must be removed by stiff brush.
  • 2. The surfaces must be clean and free of dirt,wax,salt,old paint and other contaminants.
• New surface
  • 1. Use TOA abrasive paper no. 240 - 320 to sand the wood surface until smooth.
  • 2. Fill all wood crack and hole by filler.
  • 3. Sand again until the smooth surface is obtained.
  • 4. The surfaces must be clean and free of dirt, grease, oil, wax, salt and other contaminants.

• Primer
  • Apply by brush or spray with Supertech Lacquer Primer Surfacer # 1570 at least 2 coats. (Recoatable time is at least 20 minutes)
• Topcoat
  • Apply by brush or spray with Supertech Industrial Lacquer at least 2 coats. Before topcoat any layer, TOA abrasive paper no. 320 – 400 are recommended to sand the surface

• The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.

• Storage condition
  • The product must be stored in accordance with national regulations.
  • Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.
• Shelf life : 2 years (from manufacturing date)

  *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***