SHARK Teak Oil Wood Preservative

• Transparent & High absorption to wood.
  
• Prolong wood degeneration from UV light, sunlight and moisture.
  
• Anti-mold.
  
• Free from dangerous heavy metals Lead & Mercury.

  ราคาขึ้นอยู่กับเฉดสีแต่ละเฉด โปรดเลือกเฉดที่ต้องการ ได้ที่ กด " ดูเพิ่ม " จะพบแคตตาล๊อก ติดต่อสอบถามราคา  083-2393626  ,  083-2396466  หรือ  LINE : @topaints   

• Old surface
  • For coated wood or wood with old or peeling paint film or old wood with no coating. Sand with abrasive paper to the wood surface. Sand over the painted film with TOA abrasive paper no.240-320 then clean the surface to remove grease, dust, oil or dirt.
• New surface
  • 1. Use TOA abrasive paper no. 240 – 320 to sand the wood surface until smooth.
  • 2. Fill all wood crack and hole by filler.
  • 3. Sand again until the smooth surface is obtained.
  • 4. Clean the surface until no dust remain.

• Primer
  • Apply by brush with TOA Wood Preservative 1 coat. (Recoatable time is at least 30 minutes)
• Topcoat
  • 1. Apply by brush with Shark Teak Oil at least 2 coats.
  • 2. First coat, allow the teak oil to penetrate into the wood for 1 – 2 hours and then wiping the excess Teak Oil that cover on some area.
  • 3. Apply the second coat using the same steps.

• The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.

• Storage condition
  • The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.
• Shelf life : 3 years.

  *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***