TOA Rust Shield

• Fast dry can be apply topcoat in 2 hrs.
  
• Excellent adhesion all ferrous & non ferrous metal.
  
• Can be apply any topcoat eg. Alkyd epoxy polyurethane.

  ราคาขึ้นอยู่กับเฉดสีแต่ละเฉด โปรดเลือกเฉดที่ต้องการ ได้ที่ กด " ดูเพิ่ม " จะพบแคตตาล๊อก ติดต่อสอบถามราคา  083-2393626  ,  083-2396466  หรือ  LINE : @TOPAINTS   

• Toa Rust-shield is one component modified epoxy primer paint. A fast drying epoxy ester primer and anti-corrosive pigment zinc- phosphate for anticorrosive primer on ferrous metal.
• As a primer offers excellent protection against corrosion in exposure. Exhibits very good adhesion to steel structure, alloy, metal sheet, and stainless. It is suitable for application structural steel, machinery, piping and excellent for use high quality shop primer.

• Remover all oil, grease, dirt, oxide and other foreign material by cleaning per SSPC-SP1,  Solvent Cleaning before coating.
• To prevent the formation of rust or oxide, coat as soon as possible after cleaning. For maximum protection, the coating must have direct contact with the metal surface.
• contaminants with a suitable solvent. Metal should be blast cleaned in accordance with NACE No.2 / SSPC-SP10, ISO 8501:1, SIS Sa 2.5 to a near-white finish using a suitable abrasive or hand tool cleaning in accordance with SIS St 2 or SSPC-SP2 .
• Surface repaire (cracks, pores, holes) done with TOA Epoxy putty and polishing of surface with moltoprene disk.

• Protective Coating
  • Primer Rustshield Primer 50 x 1 micron
  • Topcoat Topguard 60 x 2 microns

• The proper relative humidity in the work shall not exceed 85% RH.
• The temperature of the substrate should be minimum 10 C and at least 3 ํ C above the dew point of the air , ํ temperature and relative humidity measured in the vicinity of the substrate for prevent moisture and water drop on substrate effective adhesion and drying time.

  *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***