High fluorescent spray paint, quick drying, durability, and for making safety signs, decoration, advertising, poster and artwork
Formulated by high quality concentrated resin
Used for exterior and Interior
2 nozzles, normal and unique adjustable nozzles
Able to spray upside down
Good for all surfaces : wood, steel, and plastic
Excellent durability , quick drying, and good adhesion
Very High Fluorescence
Application
Surfaces should be clean, dry and free from oil, grease and rust before spraying
Shake can thoroughly until consistent sound of peas (2 minutes) before used and while spraying should shake can periodically
2 coats for excellent color uniformity (hold can approximately 1 foot from object to be sprayed, thin spraying for the first coat and let it dry for 10 minutes, then spray the second coat)
Safety precautions
Do not apply near flames
Do not store at temperature more than 40 oC
Ensure good ventilation during application and drying
When used it up, do not burn the can or throw it into fireplace
DESCRIPTION Toa Fluorescent Spray is fast drying lacquer spray and can be used both interior and exterior. This product has 400% greater visibility with bright luminous color that enhance any objects to see easier and brighter than regular paint.
APPLICATION INFORMATION Surface Preparation
The surface must be clean and free of dirt, grease, oil, wax, salt, old paint and other contaminants.
Chalky surfaces or loose material must be removed by stiff brush.
The surface must be clean with suitable cleansing solution and water then rinse thoroughly with fresh water and allow to fully dry.
Primer
Apply suitable primer for desired surface or apply with TOA Primer Surfacer Grey Spray #56 at least 2 coats to enhance adhesion.
Recommend to apply TOA Flat White Primer Spray #65 at least 2 coats. (If more reflection is required)
Topcoat
1. Before use, shake the can of TOA Fluorescent Spray thoughly around 2 minutes and shake periodically during spray.
2. Spray with distance from the required object around 20 – 25 cm and spray from left to right and top to bottom of the object.(Depend on skill and experience)
3. The first coat must be thin and allow at least 10 minutes to dry before spray the second coat.
Application Method : Spray
Condition During Application
Use respiratory mask with charcoal and dust filter. For prolonged or repeated handling, use nitrile gloves or polyvinyl alcohol gloves. Use safety eye wear designed to protect against splash of liquids.
No smoking.
STORAGE
The product must be stored in accordance with national regulations. Storage conditions are to keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition.
After used, the container must be kept tightly closed.