TOA GOLD Emulsion Primer

• Superior radiant glow finishing.
• Excellent outdoor durability for tropical climate with special feature of UV protection and mildew resistance.
• Superior washability.

  ราคาขึ้นอยู่กับเฉดสีแต่ละเฉด โปรดเลือกเฉดที่ต้องการ ได้ที่ กด " ดูเพิ่ม " จะพบแคตตาล๊อก ติดต่อสอบถามราคา  083-2393626  ,  083-2396466  หรือ  LINE : @TOPAINTS   

• It is an ideal primer for the new mansonry surface where the alkalinity is likely the cause paint defect for the subsequent coating system. Resist saponification on lime plaster, asbestos cement or concrete.
• It is ideal for application to both exterior and interior concretes,new and old masonry surfaces,plasters,bricks,asbestos shingled and siding.

• Remove powderly layers and efflorescense by vigorous plastic brushing or preferably waterblasting.
• Crack area must be fill with TOA Acrylic Filler.
• Remove all algae and mould by water and leave it dry after that apply 1 coat of TOA Microkill.

• 1. Substrate must be completely cured and dried (~1 month)
• 2. Clean surface until without grease, oil, mildew, release agent and foreing matters

• Old Surface /Primer
  • Apply 1 coat of TOA ACRYLIC CONTACT PRIMER.
  • Apply 1-2 coat of TOA Gold Emulsion Primer #PW222 (Yellow)
• New Surface / Primer
  • Apply 1-2 coat of TOA Gold Emulsion Primer #PW222 (Yellow)
• Topcoat
  • Apply 2-3 coats of TOA Gold Emulsion #GW919, GW707, GW555, W8008. ** remark for special system

• The temperature of the substrate should be minimum 10 ํC and at least 3 ํC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is required in confined areas to ensure correct drying.

• Storage condition
  • The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.
• Shelf life
  • 5 Years from producing at 30-35 ํC

  *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***